This kit adds the effect of blushing when the nose button is activated. It includes a touch sensitive trigger that can be mounted inside a soft nose so when you get close it triggers the blushing feature. Since there is no mechanical button this part will not wear out. Will also sell premade resin skinned noses with the "Booper" trigger built into the nose (more about this will be posted here very soon!)

When using the "Booper" trigger in your own build please make sure to have it as close to the material you use for max sensitivity. This can be cuddle fur, fleece, thin plastic / vinyl or even fur. If you are uncertain about what material to use, please contact me.

Connectors are used between each component to allow easy installation as well as making each component replaceable.

Wire lengths

Wire measurements can be made longer or shorter if needed, you can type in your required lengths for each in the custom field above. Listed below is the default lengths used:

• Cheek to cheek - 16in (40.6cm)
• Power to cheek - 12in (30.5cm)
• Nose to cheek - 12in (30.5cm)

Color Programmable

With this unit you can change the blushing color or effect when the nose button is triggered. This is easily programmed by accessing the startup menu by a combination of holding and releasing the nose trigger when first powered on (instructions included). It will retain what option you select until next time you change it.

Current Pulsating Color / Effect Options:

• Red
• Orange
• Yellow
• Lime Green
• Green
• Teal
• Blue
• Purple
• Pink
• White
• Rainbow

This kit includes the following:

• 2 diffused resin cheek plates
• Touch sensitive "Booper" trigger
• 9v battery case with On/Off switch -OR- USB power connector

Recommended USB Batteries:

• Anker 321 Power Bank (PowerCore 5K) 5,200mAh (Amazon)
• Anker PowerCore 5000mAh (Amazon)